Wireless Smoke Detector Supplier in Tsuen Wan: WANLIN-770 for Texaco Road blocks, Hong Kong

Tsuen Wan, Tsuen Wan, Hong Kong - October 8, 2026: The owners of a 5-storey block on Texaco Road had been told the same thing for a decade: provide a hose reel system and a manual fire alarm system, find room for a tank and a pump, and find the money for both. On 30 April 2026 the Fire Services Department opened a second route. FSD Circular Letter No. 3/2026 accepts an Internet of Things Fire Detection System, paired with portable fire extinguishers, as an alternative to those two requirements in composite and domestic target buildings of six storeys or below regulated under the Fire Safety (Buildings) Ordinance, Cap. 572. This report walks that Texaco Road block - an older industrial building with mezzanine inserts, roller shutters and a mixed tenancy of workshops and storage - through what the alternative actually involves, what the equipment has to prove, and how a Chinese source factory supplies the hardware and platform layer behind it. The authority for the programme is the Fire Services Department, https://www.hkfsd.gov.hk/, and its Building Improvement Support Centre on 2272 9112 handles the application route.

Key facts on the record
1. Circular Letter No. 3/2026, issued 30 April 2026, accepts an IoT Fire Detection System plus portable extinguishers in place of hose reel and manual fire alarm systems for target buildings of six storeys or below.
2. The pilot ran in ten buildings across ten districts, assessed 1 January to 31 March 2026, and recorded no false alarms, a 100 per cent online rate and better than 99.95 per cent component availability.
3. A 5-storey block on Texaco Road works out at 15 units, 20 detectors, 2 gateways and 10 extinguishers, installed in about 13 working days.
4. The department's own comparison puts the traditional route at about HK$600,000 and one to two years against about HK$200,000 and roughly two weeks for the detection route. On this block the survey puts the detection route at about HK$168,000.

The redundancy the department asked for and how a supplier proves it on site

Tsuen Wan has a particular building stock problem: blocks that are too old for the standards they are now measured against, and too tight to take the hardware those standards used to require. The Texaco Road block is one of them - an older industrial building with mezzanine inserts, roller shutters and a mixed tenancy of workshops and storage. The constraint is not a lack of will. It is metal stock, dust and intermittent occupancy, plus a mezzanine that hides the ceiling from the stair landing.

The Ordinance took effect on 1 July 2007 and covers roughly 14,000 composite and domestic buildings constructed, or first submitted for approval, on or before 1 March 1987. The department has been issuing fire safety directions against them ever since, and the three difficulties owners keep reporting are the same three the department itself lists: coordination, money, and structural or spatial limits. The circular addresses the third and softens the second. It does not touch anything else the Ordinance requires.

That last point is where most misquotations start. An IoT Fire Detection System with extinguishers replaces two items - the hose reel system and the manual fire alarm system. Automatic sprinkler systems where they apply, emergency lighting, and the automatic cut-off devices for mechanical ventilation in common and non-common areas all stay exactly where they were. Any supplier who tells a Tsuen Wan owners' committee otherwise is selling something they cannot deliver.

For the pilot, the department fitted ten buildings of six storeys or below across ten districts - including Central and Western, Wan Chai, Eastern, Sham Shui Po, Yau Tsim Mong, Kowloon City, Wong Tai Sin, Tsuen Wan, Tai Po and Sha Tin - and assessed them over a three-month window. Zero false alarms over a whole quarter, in buildings where people cook every night, is the number that changed the conversation.

Four Components, and They Do Not Belong to the Same Owner

An IoT Fire Detection System is not a box. It is four pieces with four different homes, and the circular is explicit about which is which. Buyers who understand the split early avoid the most common procurement mistake in this market: asking a factory for something that is legally someone else's job.

Two components are fire service installations and equipment. The multi-sensor detectors go inside individual units and in the common areas. The gateways - which carry the manual call point, the alarm sounder and the transmission gear - go in the common areas, and need enough of them to cover the building. Two components are not fire service installations: the monitoring platform, and the mobile application the department's frontline crews use at the scene.

Our own scope as a manufacturer sits in the first two and in the platform layer: we build the detectors, the gateways with dual SIM, the sounders, and the platform that receives, processes and forwards the signal. What we do not do, and cannot do, is hold the statutory responsibilities in Hong Kong - those sit with the registered fire service installation contractor, the transmission service provider and the service provider who acts as the single point of contact.

The practical consequence for a buyer is that a quotation should name which components are in scope. A detector-and-gateway quotation is a different product from a platform quotation, and a platform quotation that cannot hand signals onward through the transmission system is not a complete system at all. We state the boundary in our quotations so a partner can see exactly where our responsibility ends and theirs begins.

It also explains why the cheapest quotation in this market is often incomplete. If a price covers detectors and gateways but has no allowance for a platform, an API handover, a mobile application, commissioning records or spares, the missing items do not disappear - they reappear as a change order when the committee asks for the certificate.

Two Sensing Elements, Two Alarm Levels

The single most important engineering decision in this system is that one detector holds two sensing elements. Smoke alone cannot tell a smouldering mattress from a wok left on a burner. Carbon monoxide alone is slow on a fast flaming fire. Together, and with two alarm levels, they separate the two cases well enough to be useful.

A smouldering fire gives high carbon monoxide and low smoke. Cooking aerosol tends to give smoke without the matching carbon monoxide rise. That difference is what makes a pre-alarm level worth having: the system warns, the building responds, and the fire service is not called for dinner. In the Texaco Road block, with 3 households per floor sharing a landing, that logic is doing real work every evening.

Our WANLIN-770 Wireless Pressure Gauge (LoRa / 4G / 433) supports the two-level logic with independent thresholds for the smoke chamber and the carbon monoxide cell, and reports which element drove the decision in the event log. Configuration: 4G Cat-1 pressure configuration — 4G Cat-1 uplink for remote pump houses, tank farms and stand-alone risers reporting pressure direct to the cloud. Health, battery state and sensor drift are reported on the same channel, so a drifting chamber shows up as a maintenance item rather than as a surprise.

One siting rule matters more than any threshold: the in-unit detector goes near the entrance, not in the kitchen. The department's own guidance for the pilot places one detector in the living room near the main entrance of each unit, which puts it between the sleeping space and the escape route. Putting it in the kitchen instead guarantees a daily argument with the cooking, and no amount of algorithm tuning fixes a bad position.

There is a commercial reason to care about this as well as a technical one. A programme that generates call-outs is a programme that loses the committee, and the committee is the customer. Two-level logic plus correct siting is what keeps the platform quiet enough that residents still trust the alarm when it does sound.

Configuration for a 5-Storey Block on Texaco Road

Quantity is derived from the building, not from a package. The department's own guidance is that common areas need at least one detector per floor, with the exact number and position decided by floor area and layout, and that each domestic unit takes one detector in the living room near the main entrance. Non-domestic units are decided on actual conditions. Everything else - gateway count, sounder placement, extinguisher brackets - falls out of the survey.

For the Texaco Road block the survey produced the schedule below: 5 floors, 3 units per floor, 15 units in total, 20 detectors counting both the in-unit devices and the landing devices, 2 gateways, and 10 extinguishers at two 5 kg dry powder units per floor. It is a small system by any standard, which is exactly the point - a small system that can be installed in days rather than a large one that takes two years.

Two details save the most time later. First, every device ships with an identification number and a label, and the platform names devices by floor and position - a fault that says "third floor landing" is a five-minute visit, while a fault that says "device 47" is an argument. Second, the platform is zoned by floor from day one, so a podium or a commercial level can report separately from the residential floors above it instead of being untangled after handover.

We also insist on a sample kit before a full order: a small kit by air inside ten to fifteen days, enough for a partner to survey one floor, mount a handful of devices, watch the platform for a week and see the fault and heartbeat behaviour with their own eyes. Every buyer who has skipped that step has paid for it later in call-backs.

Gateways on the Landing: Local Wireless In, Dual SIM Out

The gateway is the hinge. Detectors reach it over a localised wireless link - in our implementation a sub-GHz LoRa physical layer at low duty cycle, which is what buys 4 years of battery life - and it reaches the platform over an external 4G or 5G network. The circular asks for dual SIM cards covering different external networks, and there is a reason for that specificity: a single operator's outage in a stair core is not a rare event, it is a Tuesday.

On a 5-storey block on Texaco Road we would place 2 gateways, each at a stair landing with a clear path to the floors it serves, each with two SIMs from different operators and a backup battery behind the mains feed. Where the survey shows a weak path - a rooftop tank, a metal gate, a mezzanine plate - the answer is a second gateway or an external antenna on a short run, not a higher transmit power claim on a datasheet.

The extinguisher round is unglamorous and it fails inspections: two 5 kg dry powder units per floor, bracket height, an unobstructed approach and a bilingual instruction plate nobody can read if it is fixed too high.

Field note - extinguisher and signage round, Texaco Road: "We photograph every bracket with a tape measure in frame," the maintenance contractor said. "That photograph is what closes the handover."

Bracket heights measured and photographed per level, approach routes cleared of stored goods, and the plate height corrected on two floors.

Ten Seconds, Twenty Seconds, One Hundred Seconds

Timing is where a specification stops being prose. The department published a table of how long each signal class may take to appear on the platform, and it splits by power source because a battery device polls differently from a mains device. Anyone quoting this work should be able to fill the table in from their own platform logs rather than from a brochure.

Separately from the signal classes, the heartbeat keeps the building honest about presence. Mains-powered transmission equipment checks in at 30 minutes or less; battery-powered equipment at 24 hours or less. A device that misses its heartbeat is a device the platform can name, floor and number - which is what turns a battery claim into a service level.

The second table is the one that gets ignored during commissioning and then becomes the whole maintenance story. A battery device that stops reporting is not a nuisance, it is an unprotected room, and the platform has to be able to name it. We surface missed heartbeats, low battery, drift and tamper as separate fault classes so the contractor can triage rather than guess.

Worth noting for anyone writing a specification: these are measured end to end, from the sensing element to the platform, not from the gateway outwards. A supplier who quotes only the uplink leg is answering a different question.

On the Texaco Road installation the platform timestamps each class separately, so the monthly report can show measured values against the limits rather than a single average that hides the worst case.

From a Detector on Texaco Road to the Fire Services Communications Centre

The signal path has more steps than most buyers expect, and each step is somebody's contractual responsibility. A detector actuates. The signal crosses the local wireless link to a gateway. The gateway forwards it over the external network to the monitoring platform. The platform processes it - location, device status, alarm level - and mirrors it to the department's own server through an API. The fire alarm signal then goes from the platform to the Fire Services Communications Centre through the Computerized Fire Alarm Transmission System, which is what mobilises the crews. At the scene, firefighters use the mobile application to read the system and use authorised control functions.

That architecture is worth understanding before you buy, because it decides what you are actually selling. A factory can build detectors and gateways and a platform that exposes an API. A factory cannot be the transmission service provider into the department, and should not claim to be. What we do is make sure our platform hands over clean, timestamped, correctly formatted data so the Hong Kong registered parties can meet their own obligations without a translation layer.

Five Ways These Programmes Go Wrong

Every one of these has been seen on a real block in Tsuen Wan, and none of them is a hardware failure. They are listed because a supplier who only sells boxes will not mention them, and a buyer who has not met them will meet them on site.

The first one deserves emphasis because it is the only one that can stop a project outright. Detectors go inside units, so every owner has to agree before a single plate is fixed. In a block with absentee owners, tenanted units and one locksmith's worth of locked doors - which describes most of Tsuen Wan - that is a fortnight of work before installation starts, and it is not work an equipment supplier can do for you.

The second one is the most common technical failure, and it is invisible until the building goes to sleep. A gateway fed from a circuit that is switched off at night produces a fault at midnight and an argument in the morning. Our survey form has a line for it, and we photograph the supply position before we leave the building.

Six Storeys or Below: Whether the Tsuen Wan Block Qualifies

The eligibility test is four conditions that all have to hold at once. In practice, condition four - owners' consent - is the one that kills projects, and it kills them before any hardware is discussed.

The application itself runs through the department's Building Improvement Support Centre on an intention form, and the department has said it will publish a list of service providers interested in providing IoT FDS services for owners to reference. Reach the centre on 2272 9112 or at fsdbisc@hkfsd.gov.hk for the current form and procedure - and treat that channel as the authority, not a supplier's summary.

One practical note from the field: the consent sheet is the schedule. 15 units across 5 floors, some tenanted, some locked, some owned by people who have not been to the building in years. We plan one floor per day and we do not start drilling before the sheet is complete.

The other thing that stalls applications is scope confusion. Owners sometimes read the circular as a general relaxation and then discover that a direction covering other items is still live. Read the direction, list what it actually asks for, and mark which two lines the alternative answers. That list, not the technology, is what the committee will argue about.

Applications run on the department's own form - the intention form for the IoT Fire Detection System, downloadable from the department's site and returned to the Building Improvement Support Centre - and the department has said it will publish a list of service providers interested in providing these services. Owners should expect to choose from that list rather than from a search engine.

What the Money Looks Like on a Tsuen Wan Owners' Committee Table

Committees do not vote on technology, they vote on a number and a duration. The department's own comparison is the one that gets read out at meetings: roughly HK$600,000 and one to two years for hose reel and manual alarm works, against roughly HK$200,000 and about two weeks for the detection route with extinguishers.

Those are order-of-magnitude figures from the department's comparison, not a quotation. A real number for a specific block comes out of the survey: unit count, detector count, gateway count, whether the common area has a usable unswitched mains supply, and whether any antenna work is needed. For the Texaco Road block the survey produced 20 detectors, 2 gateways and 10 extinguishers across 5 floors.

The line committees underprice is the one nobody writes down: coordination cost. A two-year hose reel programme needs structural advice, water supply works, staged levies, decanting and two summers of complaints. A two-week detection programme needs one consent round, one installation schedule and one drill. On a block where the owners are elderly, the residents are tenants and nobody is being paid to manage the project, that difference is usually decisive.

The Subsidy: What It Returns and What It Does Not

The third-round Fire Safety Improvement Works Subsidy Scheme covers the detection system and extinguisher alternative. The published arrangement is up to 60 per cent of the eligible works and consultancy fees, or the subsidy cap for that class of building, whichever is the lower figure. On the Texaco Road block at HK$168,000, sixty per cent is about HK$100,000, leaving roughly HK$68,000 for the owners to find - before any cap is applied.

Two cautions we give every committee. First, eligibility and the cap are the scheme administrator's call, not ours and not the contractor's; confirm before you set a budget. Second, subsidy claims run on documents. A claim file that cannot produce labelled device lists, commissioning records, photographs and an event log will cost the committee more in time than the percentage is worth.

That is a product decision as much as an administrative one. Detectors ship with identification numbers and labels, the mounting plate carries the operation instruction, and the platform exports the commissioning and event records in a form that can be attached to a claim. Traditional Chinese and English labelling is available where the project requires it.

There is also a cash-flow point committees miss. Two weeks of works against one to two years changes what has to be collected and when: a shorter programme usually means one levy instead of staged calls, and it means the building is not living inside a construction site for two summers. In Tsuen Wan, where many of these blocks have elderly residents on fixed incomes, that is often the argument that actually carries the vote.

Who Signs What

Three parties, three sets of duties, one coordinator. The registered fire service installation contractor installs, maintains, inspects and repairs the fire service installation components, issues the FS251 certificate, and has to finish repairs within 30 days or report the matter to the department. Work has to follow the approved plans and the as-built record has to be kept. The transmission service provider maintains the communication path and gets alarm signals to the department promptly and reliably. The IoT FDS service provider is the single point of contact, and owns the site survey, the feasibility report and the monthly performance report.

From a factory's side, the deliverable is the part that makes those documents possible: numbered devices, a platform that keeps a clean event history, health and battery reporting, and a documentation pack that supports EN 14604 and EN 50291 declarations together with CE, RoHS, REACH, FCC and UKCA files.

We are explicit with partners about the boundary, because it protects them. We are a manufacturer in Shenzhen. We are not a registered fire service installation contractor in Hong Kong, we do not hold the transmission licence into the department, and we do not issue the FS251. What we do is supply equipment and a platform that let the registered parties meet their obligations with less friction - and we say so in writing before an order, rather than after a committee asks who signs the certificate.

The Documentation Pack: What Has to Be in the File

A Hong Kong handover is a paper event as much as an electrical one. The circular sets the statutory responsibilities, but what closes a job in practice is a file the registered contractor can sign against and the committee can keep. Overseas buyers who have never worked in this market consistently underestimate how much of the schedule is document preparation rather than installation.

Our pack covers the product declarations, the conformity files and the shipping paperwork. Two standards come up every time: EN 14604 for smoke alarm devices and EN 50291 for carbon monoxide detection, with the EN 54 series referenced where a component is supplied into a system context. Alongside those sit the conformity files buyers' own markets ask for - CE and UKCA marking, RoHS and REACH, FCC for radio, and the battery transport documentation that decides whether a shipment flies or sails.

Two things we do deliberately. First, the device schedule is generated from the platform after commissioning rather than typed by hand, so the numbers on the file are the numbers in the system. Second, we hold the spare parts list against the building for the life of the contract - a replacement detector three years later should be the same model with the same label, not a near-equivalent that changes the commissioning record.

For private label partners the pack is rebuilt under their own brand: artwork, manuals, quick start guides and carton printing, with the underlying test reports kept traceable to the same production line. That traceability is what lets a partner answer an audit without opening a negotiation with their own supplier.

The Survey Before the Quotation

Nobody should price a Tsuen Wan block from a floor plan. The survey produces eight things, and each of them changes either the quantity or the risk.

On Texaco Road the survey took one morning with two people and a handheld receiver. The finding that mattered was not radio: it was that two of the 15 units were let to tenants who were not on the owners' list, which moved the installation start by a week while consent was collected.

The survey also settles a question that comes up on every quotation: whether the gateway can be powered legally. A detector is a battery device and needs nothing from the building. A gateway needs mains, and in older blocks the only supply in the common area is often a lighting circuit that is switched off at night or has no spare way. Finding that out on day one costs a morning; finding it out on installation day costs a week.

We issue the survey as a document, not as a conversation: candidate gateway positions with readings, a marked-up floor plan, the device schedule, the power note and the access constraints. That document is what the contractor prices from and what the committee files.

Concrete, Gates and Tanks: Coverage Is a Measurement, Not a Claim

Older industrial building buildings punish radio. A reinforced concrete floor slab takes a real bite out of a sub-GHz link, a metal security gate at the entrance takes another, and a rooftop water tank throws a shadow exactly where a gateway would otherwise go. On the Texaco Road block the worst reading we logged was -102 dBm, taken from the top-floor landing to a ground-floor gateway position - workable, but with no margin left for a humid summer and a corridor full of stored goods.

The answer is redundancy rather than power. A second gateway on the stair core means one unit can fail without the building going dark, and a short external antenna run costs less than call-backs. Our WANLIN-770 family supports dual-gateway registration, so a detector that loses its primary path is re-homed automatically and the event is logged as a fault rather than silently absorbed.

Environment matters as much as structure. This block runs at about 30 degrees on the landing in summer with relative humidity around 84 per cent. Condensation and steam are false alarm sources, not detector failures, and they are handled by siting and by the two-level logic rather than by desensitising the chamber.

There is a third factor specific to Hong Kong that visiting engineers miss: the buildings change. A partition goes up, a mezzanine gets inserted, a shop unit changes hands and fills with stock, and the radio path that was fine at commissioning is no longer fine a year later. That is why the coverage survey is a document with readings rather than a verbal clearance, and why we recommend repeating it whenever a block changes use.

Holding False Alarms at Zero While the Building Keeps Living In It

Zero false alarms over a three-month pilot quarter is the result that made this policy possible, and it is worth being clear about how it was achieved: not by making detectors less sensitive, but by giving the system two sensing elements, two alarm levels and a siting plan that respects how people actually cook, burn incense and store things on a landing.

In a Tsuen Wan walk-up the false alarm candidates are predictable. Cooking aerosol in a unit with the door open. Incense at a shrine on the landing. Steam from an open corridor window during the wet season. Workshop dust in an industrial unit. Each has a signature: smoke without a carbon monoxide rise, or a short spike that decays. The system absorbs them at the pre-alarm level and logs them, so the pattern can be reviewed instead of argued about.

The operational discipline matters as much as the electronics. Silent test mode lets a contractor prove the system without emptying the building; day and night modes let a hotel or a school keep a sane acoustic environment; and the drill record belongs in the committee's minutes, not only in the platform.

Seasonality is the part overseas buyers never ask about and Hong Kong contractors always do. Typhoon season brings open windows, wet corridors and condensation on cold surfaces; the wet months push landing humidity to 84 per cent and above. None of that causes a fire, but all of it causes complaints if the siting ignores it, and complaints are what get a system switched off - which is the only outcome worse than a false alarm.

One more honest note. No detection system removes the need for housekeeping. Storage on a landing blocks an evacuation route and it also blocks a sounder; a corridor window left open onto a light well brings steam into the detection zone. The system can absorb the aerosol, but the committee still owns the landing, and the two things have to be handled together if the block wants the zero to hold.

Batteries, Mains and the Thirty-Day Clock

Power design in this system is deliberately boring. Detectors run on battery with a service life of three years or more - 4 years on the cells specified for this configuration - and report their own health on the heartbeat. Gateways run on the building's mains supply with a backup battery behind them, because the gateway is the one component that cannot go quiet.

The maintenance rule that concentrates minds is the 30-day one: the registered contractor has to complete a repair within 30 days or report the matter to the department. That makes fault reporting a commercial issue rather than a technical curiosity. A platform that surfaces a low battery, a removed detector or an offline gateway on the day it happens is the difference between a routine visit and a reported breach.

The practical failure mode is not a dead cell, it is an undocumented one. A detector that quietly drops out of the network and is not noticed until the annual inspection has left a floor unprotected for months, and under the reporting regime that is a reportable fault rather than a maintenance note. Hence the insistence on heartbeat reporting that names the device, and on a contractor who actually watches the platform rather than logging in once a quarter.

We also specify the cells rather than just quoting a number. A three-year life on paper means nothing if the device sits in a humid stair core with a corridor window open; the honest answer is a declared cell, a declared duty cycle, and a platform that reports the measured state so the claim can be checked against the building.

Monthly Performance Report and the FS251

The paperwork is part of the product. A service provider has to deliver a site survey and feasibility report before installation and a monthly performance report afterwards, and the registered contractor closes the fire service installation work with an FS251 certificate and an annual inspection.

What buyers should ask for is the content of that monthly report: online rate, component availability, alarm events by class with timestamps, faults raised and closed with durations, battery and health status by device, and any site changes since the last report. If a supplier can only offer a green tick on a dashboard, the committee has nothing to file and nothing to audit.

The pilot set the bar: 100 per cent online rate and better than 99.95 per cent component availability. We quote the same measures on our own platform reports so a Tsuen Wan committee is comparing like with like, and we export the event history rather than summarising it.

Which brings up a question worth asking any supplier before signing: can the platform export? A report locked inside a vendor dashboard is a report the committee cannot attach to a subsidy claim, cannot show an insurer and cannot hand to a successor contractor. Ours exports the event history, the fault log with durations and the device inventory with battery and health states, in a form that survives a change of contractor.

Commissioning Sequence: Day One to Handover

The sequence below is what a 5-storey block on Texaco Road actually looks like from the first visit to the drill. It is included because buyers price the wrong thing when they price only the hardware: the schedule is mostly access, testing and documentation.

The step that gets skipped under pressure is fault injection, and it is the one that proves the maintenance model. Removing a device and watching the platform raise a named fault inside twenty seconds tells the contractor whether the 30-day repair clock is workable in this building before it has to be. A system commissioned without that test is a system whose first fault will be its first surprise.

Handover is not the end of the job. The monthly performance report starts the following month, and the first quarter is when siting mistakes surface - a detector too close to a kitchen door, a corridor window that opens onto a light well, a landing that accumulates storage. Our own practice is to review the first quarter's event log with the contractor and adjust siting while the team is still on site, rather than waiting for the annual inspection to find it.

How an Overseas Partner Buys This as One Package

The reason one-stop supply wins here is organisational, not technical. A six-storey block in Tsuen Wan has nobody whose job is to integrate four vendors. The committee wants one contractor, one schedule and one phone number. That is why we sell the hardware, the platform and the documentation as a single package, and why the partner programmes are built around who carries what.

The partner runs a building management platform and wants fire detection as another data source rather than another box: an open API, event history the platform can consume, and a device health feed.

Partner note - a system integrator adding fire to a building platform: "If the fire system cannot talk to our platform, it becomes a separate project with a separate contract," the technical director said. "We wanted one log."

Terms are ordinary and stated up front: factory-direct pricing, private label and OEM from low volumes, sample kits by air inside ten to fifteen days so a partner can survey and test one floor before committing, FOB, CIF and EXW terms, mixed containers consolidated at the Shenzhen factory, and a distributor or agent programme with territory discussion for partners who commit to annual volume. Consignments for Hong Kong programmes cross from Shenzhen through Yantian or Shekou into Kwai Tsing, and onward export runs on the same consolidated schedule.

What we ask a new partner for is small: one building, one survey, one floor installed, one month of platform data. That is enough to prove the coverage, the timing and the reporting in the partner's own market, and it is a cheaper argument than any document we could send.

Logistics for Hong Kong work are short and predictable - Shenzhen to Kwai Tsing is a same-day crossing once the paperwork is done - but the paperwork is the part that decides the date. Numbered cartons, a packing list that matches the device schedule, and certificates that match the shipment are what keep a container out of a warehouse. We pack to the device schedule for exactly that reason.

Questions Tsuen Wan Owners and Overseas Buyers Ask

What exactly did Circular Letter No. 3/2026 change?

From 30 April 2026 the Fire Services Department accepts an IoT Fire Detection System together with portable fire extinguishers as an alternative to the hose reel system and the manual fire alarm system in composite and domestic target buildings of six storeys or below regulated under the Fire Safety (Buildings) Ordinance, Cap. 572. Everything else the Ordinance requires stays exactly as it was, including sprinklers where they apply, emergency lighting and the automatic cut-off devices for mechanical ventilation.

Which buildings qualify?

Four conditions have to be met together: the building is regulated under Cap. 572, a fire safety direction has already been issued against it, it is a composite or domestic building of six storeys or below, and every owner agrees to detectors in the common parts and inside the units, transmission and alarm equipment in the common parts, and the right number of extinguishers on each floor.

What did the pilot scheme actually record?

Ten target buildings of six storeys or below across ten districts were fitted in the fourth quarter of 2025 and assessed from 1 January to 31 March 2026. The department reported no false alarms, a 100 per cent system online rate and better than 99.95 per cent component availability over that period.

How fast does a signal have to reach the platform?

The timing depends on the power source. Fire and pre-alarm signals have to reach the platform within 10 seconds from mains-powered equipment and within 20 seconds from battery-powered equipment. Fault signals have to arrive within 20 seconds regardless of the power source, and status signals within 100 seconds. Heartbeat checks run at 30 minutes or less for mains equipment and 24 hours or less for battery equipment.

Why two sensing elements in one detector?

Smoke and carbon monoxide together let the system separate a smouldering fire - high carbon monoxide, low smoke - from cooking aerosol, which is usually smoke without a matching carbon monoxide rise. That is what makes a pre-alarm level useful instead of noisy, and it is the reason the pilot recorded no false alarms.

What does the gateway have to do?

It carries the manual call point and the alarm sounder, receives the detectors over a localised wireless link, and forwards everything to the monitoring platform over an external network. Reliability is why two SIM cards from different operators are specified, and why a second gateway is worth the money on a six-storey stair core.

How does a fire signal reach the Fire Services Department?

The platform receives the signal, processes it, mirrors it to the department's own server through an API, and then passes the fire alarm signal to the Fire Services Communications Centre through the Computerized Fire Alarm Transmission System. Frontline firefighters use the mobile application at the scene to read the system and use authorised control functions.

Who is responsible for installation and maintenance?

A registered fire service installation contractor installs, maintains, inspects and repairs the fire service installation components, issues the FS251 certificate, and has to complete repairs within 30 days or report the matter to the department. The transmission service provider maintains the communication path into the department. The IoT FDS service provider coordinates the whole thing as the single point of contact.

What does the alternative cost compared with a hose reel system?

The department's own comparison puts a hose reel and manual fire alarm system at roughly HK$600,000 and one to two years of works, against roughly HK$200,000 and about two weeks for the detection system with extinguishers. The bigger difference for most owners is the second one: two weeks does not need a tank, a pump, structural checks or a decant.

Is there subsidy support?

The third-round Fire Safety Improvement Works Subsidy Scheme covers the detection system and extinguisher alternative, at up to 60 per cent of eligible works and consultancy fees, or the subsidy cap for that building type, whichever is lower. Owners should confirm their own eligibility with the scheme administrator before they vote on a budget.

What does a factory actually supply into this?

The hardware layer - multi-sensor detectors, gateways with dual SIM and manual call points, alarm sounders and the platform with its API and the firefighter application - supplied to the registered contractor, the transmission service provider and the service provider who carries the statutory responsibilities in Hong Kong. Listing, installation and certification belong to the Hong Kong registered parties, not to an overseas factory.

Market Direction: What Tsuen Wan Buyers Are Positioning For in 2026

• Signal timing is being written into tender documents as a table, not a sentence - fire, pre-alarm, fault and status each with their own limit.
• Subsidy paperwork is driving product documentation: owners' committees ask for the file that supports the claim before they ask for the discount.
• Retrofit without shutdown has become the default requirement in occupied buildings across Asia, not a Hong Kong peculiarity.

Our read from the enquiries coming into the factory is simple: the buyers who will win the retrofit work are the ones who can answer a committee in one meeting - cost, duration, consent, documents - and then prove the system night after night on a platform they can export. That is what we build for.

Further reference for buyers checking the policy and the standards behind it: Office of the Communications Authority, together with the Fire Services Department circular itself.

Wanlin - IoT fire detection system and Hong Kong smart building retrofit equipment manufacturer and export supplier, Shenzhen, China. Wanlin Manufacturing Group builds multi-sensor smoke and carbon monoxide detectors, dual SIM 4G LoRa fire alarm gateways with manual call points and alarm sounders, and the monitoring platform with API, event history and the firefighter application - supplied factory-direct to registered contractors, service providers, integrators, distributors and trading companies. OEM, ODM and private label, bilingual Traditional Chinese and English labelling, EN 14604 and EN 50291 documentation with CE, RoHS, REACH, FCC and UKCA files. Statutory installation, certification and transmission responsibilities in Hong Kong rest with the Hong Kong registered parties; we supply the equipment and platform layer behind them.

• Email: wanlinfirecontrol@163.com
• Export hotline: +8613261677119
• Website: www.wanlinfire.com
• Shenzhen HQ: Wanlin Group, Building B, Building 1, Beisida Medical Device Building, 28 Nantong Avenue, Baolong Community, Baolong Sub-district, Longgang District, Shenzhen, Guangdong, China
• Markets: Hong Kong and Macao, Asia, the Middle East, Europe, Africa, Latin America and the Pacific - 24-hour response
• Global partner recruitment: distributors and importers, registered fire service installation contractors, transmission service providers, building services and MEP contractors, system integrators, estate operators, trading companies and sourcing offices welcome - OEM, ODM, private label and territory programmes open for 2026-2027
• Programme reference: FSD Circular Letter No. 3/2026, 30 April 2026; Fire Services Department Building Improvement Support Centre, 2272 9112, fsdbisc@hkfsd.gov.hk